if this is wrong for Applevis, please delete it. But, I do need help. I have an Amazon basics deadbolt with the keypad, and I can’t reprogram my entry code. The batteries ran out and of course that meant everything got erased. I found a couple of videos which have helped a little. But, when I try to do the things it says to program my entry code, it doesn’t work. Does anyone have experience with this device and any advice?
Comments
Here's what co-pilot says.
Keep in mind; I have no idea if this will work.
I'd highly recommend using co-pilot to ask questions like this, it's very useful.
Here’s a step-by-step guide to help you change the code on your AmazonBasics Electronic Deadbolt:
1.
Install New Batteries: First, make sure you have fresh batteries installed in the lock. This usually requires four AA batteries.
2.
Enter Programming Mode:
•
Press the Unlock/Lock button on the keypad.
•
Enter the default programming code (usually 0000) and press the Unlock/Lock button again.
3.
Change the Programming Code:
•
Press 4 on the keypad, then press the Unlock/Lock button.
•
Enter a new 4-digit programming code of your choice and press the Unlock/Lock button. The lock should flash green twice and beep twice to confirm the change.
4.
Delete the Default User Code:
•
Enter your new programming code and press the Unlock/Lock button.
•
Press 2 on the keypad, then press the Unlock/Lock button.
•
Enter the default user code (usually 1234) and press the Unlock/Lock button. The lock should flash green twice and beep twice to confirm the deletion.
5.
Add a New User Code:
•
Enter your new programming code and press the Unlock/Lock button.
•
Press 1 on the keypad, then press the Unlock/Lock button.
•
Enter a new user code (4 to 10 digits) and press the Unlock/Lock button. The lock should flash green twice and beep twice to confirm the new code.
6.
Test the New Code: Finally, test the new user code by locking and unlocking the door to ensure everything is working correctly.
If you need more detailed instructions, you can find a helpful guide here: https://smarttechville.com/amazonbasics-electronic-deadbolt-programming/