Using a Braille Display on iOS: an Introduction

By Scott Davert, 9 November, 2011

Member of the AppleVis Editorial Team

Last edited by Scott Davert on November 8, 2023.

Can I use a braille display with my iOS Device? If so, which models are compatible?

Any iOS Device that runs VoiceOver can support a large variety of Bluetooth braille displays. Common models include Humanware's Brailliant line, the Focus displays from Vispero, displays from Orbit Research, Alva, VissioBraille , HIMS, and other companies. Please see Apple's official list of supported braille displays. You may also find this page listing common braille commands for iOS to be helpful. If you are on a mantis Q40, you may find this list of Bluetooth keyboard commands may be of more value, since the Mantis has a QWERTY keyboard. These commands also apply to the QWERTY keyboard when in use on the Activator.

Over thirty models are supported, according to Apple, so chances are that if your display includes Bluetooth connectivity, it will be supported. Please see the link above to ensure that your model is listed. If it is listed, you're in luck! Even if it isn’t, you may still be in luck. At last check, in September 2023, Supported devices not included on this page include the Actilino from Helptech, QBraille From HIMS, BrailleNote Touch and Touch +, along with devices from Orbit Research. There may be others, but those are the devices that spring to mind.

How do I pair my display with my iOS Device?

This process differs for each display, so I will not answer in detail. For example, the Mantis and Braillliant BIX series has you pair through Bluetooth settings, while others may require you to do other things like match an authentication code between the iOS Device and the braille device. However, most will still allow you to pair through the conventional method. Here are generic instructions:

  • Put your display in "terminal" or "discoverable" mode.
  • On the iOS Device, go to Settings, accessibility, VoiceOver, Braille. If the iOS Device Bluetooth is not on, you will be prompted to turn it on at this point; do so before continuing.
  • After a few seconds, you will see a list of available displays (assuming your display is in the correct mode). Simply choose your display from the list by double tapping it.
  • IN some cases, you will then be prompted to enter a passcode on the iOS Device. This code will differ depending on which display you are using, so check with the documentation or display manufacturer to find the correct code. The manufacturer should also let you know if no pin is required, which is more common with newer devices. When entering a passcode, you will only have a few seconds to enter it. so be ready with it and be sure you are comfortable typing with the iOS Device's onscreen number pad. Once you have entered the code, double tap the "pair" button, found in the upper right area of the screen, just below the status bar. It is also possible to enter the passcode on a Bluetooth keyboard if you find that a more comfortable way to enter the passcode.
  • If all went well, there will be a delay of a few seconds and then you will see braille appearing on your display. You can now use the display to read much what VoiceOver says and, assuming you have a keyboard on the display, enter text and commands into the iOS Device.

Troubleshooting

If you take too long to enter the passcode, if you fail to pair your display a few times in a row, or if iOS is just in a bad mood, you may run into strange problems. Below are some common challenges and how you can try to overcome them.

  • If you try to enter the passcode three times and are unsuccessful, you will find odd things happening; the iOS Device may not find the display, it may refuse to prompt for the passcode, and so on. To get around this, go back to the main Settings screen and choose Bluetooth (this item is under General in older versions of iOS). Find your display in the list of devices and double tap it. Now find and double tap the "forget device" button. You are now free to try three more times to pair the display.
  • If that does not work and error messages still appear when you try to pair your display, try turning the iOS Device off and back on (this is not the same as locking and unlocking it). Also try resetting your braille display and/or clearing out its saved Bluetooth devices(refer to the device's documentation for help). If both of these do not solve the problem, try resetting network settings. This reset is located under settings>General>Reset. You will have to reenter any Wifi network information you have stored, but it can also sometimes make things work again. This is because both the Bluetooth and Wifi radios on your iOS Device are on the same chip.

USB connectivity

Unless your iOS device uses USB-C, Along with your iOS Device and braille display, you will also need the Lightning to USB 3 Camera Adapter available from Apple for approximately $40. TO connect your braille display in this manor, you will need to plug in a Lightning cable to provide power. You will then connect the USB-A port to the braille display, and plug the other side of the adapter, which has a short cable, into your iOS device. Of the displays I’ve tested, the Brailliant BI 20X, Brailliant BI 40X, Mantis Q40, Activator and Chameleon 20 were the only devices that I was able to connect successfully. The number of displays which support the new HID standard established in 2018 is very low since it is new.

What codes and grades of Braille are supported by iOS?

iOS supports contracted braille (U.S., UK, and UEB) for input and output, and Nemeth when displaying equations (see the braille settings to configure these and other options). It also supports eight-dot braille, and the table used for that is based on your language selection. In other words, the language your device is speaking is the same language in which eight dot braille will be handled.

I'm having a lot of difficulty typing emails, is there any sort of work around for this issue?

Particularly with iOS 14.5 and later, it seems to require much less editing and fighting with the cursor to compose emails using either the Drafts application or the Notes app. When you have finished composing your email in either app, you can select all of the text typed by pressing space with dots 2-3-5-6. Then, press space with dots 1-4 to copy the text to your clipboard. Finally, move to the mail app, and once you are ready to type the message, press space with 1-2-3-6 to paste what you have copied. Important note: when you have an older iPhone such as the iPhone from the XR on down, you will notice that the behavior from Mail will often still cause issues in the Notes application. This is a work around, and like most such workarounds, it will only help to some degree. Editing a 3 or 4 paragraph email may not be possible on older devices in Notes , but does typically work with Drafts.

When using the NLS e-Reader, Brailliant BI20/40X, Chameleon or BrailleOne Entering commands for editing text such as select all, copy and paste are not working, what can I do?

For those using all but the NLS E-Reader, which at the time of writing was still using an older firmware version, you can now update to version 2.1 of the firmware which addresses these issues. Again, for those using the NLS E-Reader, you will still need to follow what is written below. There are ways to still accomplish what you need to using these function, though the workarounds do require more effort. As an example, let’s say that you have a note full of text that you would like to select, copy to the clipboard, and then paste into another application. Though you could use the share sheet, it is sometimes faster to use keyboard commands instead. To select all of the text in your note, do the following: 1. Press space with 2-3 or space with 5-6 until you reach the VoiceOver Rotor option called “edit”. 2. Press space with dot 3 or space with dot 6 until you receive the VoiceOver announcement “select all” 3. Press space with 3-6, and the text should now all be highlighted. To copy the text: 1. Press space with 2-3 or 5-6 until finding the "edit" rotor option. 2. Press space with dot 3 or 6 until you reach "copy". 3. Press space with dots 3-6 to copy the text to your iOS device's clipboard. Now that the text is copied, move to any text field where you would like to paste the text and do the following: 1. If you aren't already on the "edit" rotor option, navigate to it by pressing space with 2-3 or 5-6 to move through the list of rotor options. 2. Once you have located the "edit" rotor option, press space with dot 3 or space with dot 6 until you encounter "paste". 3. Press space with 3-6 to select this option and the text is placed on iOS's clipboard will be pasted.

When using the NLS e-Reader, Brailliant BI20/40X, Chameleon or BrailleOne, how can I reliably enter a new line in a text field?

From iOS 16.0 onward, this is a known bug. For all but NLS E-Reader users, you can update to firmware vversion 2.1 from Humanware, and this will fix the bug. For those on a Humanware NLS E-Reader, there are a few suggested workarounds available. One is to emulate the Option key on the Bluetooth keyboard followed quickly by dot 8. To emulate the Option key, press space with dots 2-7. Thus, to insert a new line, you would press space with dots 2-7 followed quickly by dot 8. Another is to press space with dots 1-4-6 to unhide the onscreen keyboard, followed by space with 4-5-6 and then pressing a Cursor Routing Button. Finally, you can also enter the command space with dots 3-7 followed by the letter j to insert a new line.

I’m having trouble entering passwords in some places with iOS, is there a workaround for this?

Many websites and apps do not accept entry from a braille display regardless of code of braille or your table settings. However, you have a few options for overcoming this. One is to press space with 1-4-6 to make the onscreen keyboard visible. At that point, you can enter the password on the touchscreen and proceed with logging in. You can also write the password in a note or other text field, press space with 2-3-5-6 to select all, navigate back to the text field requiring the password, and then press space with 1-2-3-6 to paste the contents of that note into the field.

When I am trying to enter numbers with the braille display, such as on money transfer screens, my braille keyboard entry is not accepted: what can I do?

You can do the same method described above for entering passwords by unhiding the onscreen keyboard and entering the numbers that way. As a reminder, pressing space with 1-4-6 will hide and un-hide this keyboard. You can also select the numbers from your braille display to enter the amount.

I Want To Use a Shortcut That is not Currently Available on my Braille Display, Can this be Done?

You can decide not only what function you would like to be able to carry out from your Braille display, but also what keyboard combination you would like that command to have. If the command you desire is already in use by another function, that’s okay, you can change it to something else. The commands are specific to each Braille display, so if you work with more than one, you will need to set these commands up for each device. Though most Braille displays have a Perkins style keyboard, they also have buttons that make them unique, which is the reason Apple has done it this way. For example, the Focus displays, which have many controls on the front of the device that can be either assigned, or re-assigned, allow for many more customized commands beyond the Perkins style keyboard itself. The amount of options available for new commands will vary based on the Braille display’s specific capabilities and programmable buttons.

To assign a new command for your Braille display, go to Settings>Accessibility>VoiceOver>Braille>the name of your Device>More Info>Braille Commands”. Within this screen, you will find seven categories for configuring new or existing commands. You will also find the option to “Reset All Commands” at the bottom of this screen. There are too many options to list, but I will describe how to add or change a command by example below.

Let's set up a new braille keyboard shortcut to lock the screen of the connected iOS device. Since I am a user of the Brailliant, this allows me to take full control of my iOS Device without having to ever interact with it, since I can already wake it up by pressing a Cursor Routing Button. Note that this will not apply to displays from other manufacturers. This command to lock the screen is only an option from iOS 15.1 onward, but will work with any braille display connected to your iOS or IPadOS device. Step by step instructions follow:

  1. After navigating to Settings>Accessibility>VoiceOver>Braille>More Info>Braille Commands, activate the “Device” button.
  2. Scroll down to the “Lock Screen” button.
  3. Navigate to "Assign New Braille Keys", and activate it.
  4. Press a key, or combination of keys, that you wish to be assigned this command. Be sure to either pick something you do not ever use, or a brand new command altogether.
  5. If the command you have chosen doesn't already have something assigned to it, you will be done with this process. If the Braille keyboard assignment does have a command already associated with that keyboard combination, you will get an alert telling you what the already assigned action is, and asking you if you wish to change it.
  6. Choose "OK" or "Cancel", and the appropriate option will be chosen.

You can now press that Braille keyboard combination you have assigned this function and your screen will lock.

Pressing Dot 8 in a Text Message or Some Other Chat Programs Send my Messages Right Away, is There a Way to Insert a Line Break in These Instances?

There is. Simply add the Option key followed by dot 8. The default braille keyboard combination for this is space with dots 2-7.

Can I Use Siri With a Braille Display Only?

To set up Siri to work with braille you must first enable "Type to Siri". Turn this on by going to Settings>Accessibility>Siri>Type to Siri. Once this is turned on, pressing the side button, or Home button, you will find a keyboard ready to accept text input. Using braille only, you will have to navigate to the bottom of the screen where the text field is. When you invoke Siri, there will not be a noticeable change on a braille display, Though the text field will be at the bottom of the screen. You cannot seem to use space with 4-5-6 to get to the bottom of the screen when Siri is activated. Instead, you must press space with dot 4 until you get past whatever you are working on. If, for example, you are on your Home Screen, you will have to press space with dot 4 until you get past the last item on your dock. Now, you can type something you would like Siri to do, press dot 8, and Siri will carry out the requested phrase. With iOS 15 and later, you will find the results of your typed command by pressing space with dot 1. Press space with dot 4 again and a Cursor Routing button to type another request. TO exit Siri, press space with H.

If you would like to set up a braille display command to invoke Siri, you can also do this. Step by step instructions follow:

  1. Head over to Settings>Accessibility>VoiceOver>Braille>More Info (under the device you have connected), and then commands.
  2. Activate the Device button.
  3. scroll down to the Siri button and activate it.
  4. Scroll to "Assign New Braille Keys.
  5. Have a command in mind so that you can immediately press this keyboard combination. For example, Backspace with S. If the command you have chosen doesn't already have something assigned to it, you will be done with this process. If the Braille keyboard assignment does have a command already associated with that keyboard combination, you will get an alert telling you what the already assigned action is, and asking you if you wish to change it.
  6. Choose "OK" or "Cancel", and the appropriate option will be chosen.

I like reading books on iOS, but can I set up auto-scroll?

This feature has been available on some of the braille displays sold by a German company called HelpTech, but Apple has brought it to all braille displays in iOS 14 and later. To set it up, you will first need to assign a braille keyboard command to start and stop auto-advance. You will find the option for assigning a new braille keyboard command under the braille category. There are also options to assign keyboard commands to control the speed of the auto-advancing. If you are unfamiliar with how to assign braille keyboard commands to certain actions, please see the above section on doing so in this guide. If you don’t wish to assign braille keyboard commands to control the speed of auto advance, you can also add this to your VoiceOver Rotor and control the speed that way.

Is There a Way to Quickly Switch Languages with Braille?

iOS 13 and later has many different braille tables to choose from. You will first need to add the braille table you wish to use. To add a table, do the following:

  1. navigate to Settings > Accessibility > VoiceOver > Braille > Braille Tables.
  2. After the “edit” button, you will be presented with a list of tables which have already been added to your iOS device. If you have not added any, you will have the one that corresponds to your region settings. If you have not downloaded any other braille tables, this will be followed by an “Add Braille Table” button.
  3. After activating the "add braille table" button, you will be presented with a list of languages. Selecting any of these languages will download the selected braille table for use. You can also type a language in the search box if you would like. Either way, select the desired language.
  4. Selecting the listing of the language under either heading will select that braille table. You are then presented with a System heading, followed by the language, then the Liblouis heading followed by the language again. At this time, it appears that the Liblouis tables still have translation issues, so if you have the language listed under the System heading, I would recommend selecting this. Note that some languages do not have System tables, but only Liblouis.
  5. Now the braille table you just added is available from within iOS anywhere via the VoiceOver Rotor. If this is your first time adding a braille table, you will find a new rotor option called "braille table".

For iOS 12.x and earlier, you will not find this setting under the options for braille. Instead, you will need to set this up under the “speech” options in VoiceOver as described below.

  1. Go to Settings>General>Accessibility>VoiceOver>Speech
  2. Under the “rotor languages” heading, choose “add new language.
  3. Choose the language you wish to be able to switch to from the list of available options.
  4. Once you select a language, you will be returned to the previous screen. If this is the first time you have added a new language to your iOS device, you will find a new rotor option called “Language”. If you already have items in your Language rotor option, the newly added language will appear among the other options. When you switch to the new language, both VoiceOver’s speech and your braille table will switch immediately.

Do you have any other suggestions for users of braille devices on iOS?

There are many tips and tricks to help you get the most out of your braille display and iOS Device. One such guide by David Woodbridge can be found here. There is also a blog post entitled Ten Tips for Braille Users of iOS Devices. if the first set of tips aren't enough, there is a second one as well

This is good info, but which display should I choose?

The choice of a specific braille device is going to depend on your preferences as a user. As such, what I find works well may not be suitable for you. I would recommend checking out the various braille devices in our accessory reviews, for more information.

Can I get this info in an audio form instead?

I have recorded a podcast which you can listen to by clicking the above link. This podcast covers much of what has been discussed here in written form, but if you do not prefer audio, or can’t access it, a transcript is also included.

Disclaimer

The article on this page has generously been submitted by a member of the AppleVis community. As AppleVis is a community-powered website, we make no guarantee, either express or implied, of the accuracy or completeness of the information.

Options

Comments

By Isaac Hebert (not verified) on Friday, February 21, 2014 - 15:59

I never thought that 8 dot braille was useable with iOs.

By Ekaj on Monday, August 21, 2017 - 15:59

Thank you for posting this. I've been seriously thinking about getting an iPhone for a number of reasons. In talking things over with my parents, I discovered that there'd be no extra monetary cost if I were to stick with my family plan. My parents and I originally thought that an iPhone might not be a good solution due to my dexterity issues. But upon reading this post and Apple's other resources, I think an iPhone is definitely in my future. Certainly a win-win solution in the works here.

By John Gurd on Monday, October 21, 2019 - 15:59

This is great. Good to have all the IOS Braille info pulled together. Thanks.

By Rob on Friday, August 21, 2020 - 15:59

Hello, I was wondering if anyone can assist me with a question I cannot seem to find the answer to? I am using a focus 40 Blue classic Braile display with an iPhone 11 and iPad pro. while I have had this display for many years I have only used it with Jaws on a windows PC. I am finding that when I am using the Focus with an IOS device I cannot get VoiceOver to shut up when I am panning through text. I am wondering if there is a silent way to use the Braille display, other than muting VoiceOver speech. I am not skilled enough to use auto-panning. I would like to begin to practice my skills at night before bedtime and I would rather do this without VoiceOver chatting away. any help would be appreciated. I know I have a lot to learn when it comes to using IOS with a Braille display as the only method of input. . thanks.

By Anna Beige on Friday, August 21, 2020 - 15:59

In reply to by Rob

Like the subject line says, in order to get VoiceOver to stop talking while you're using a braille display, you have to turn speech off by doing an 'm' cord. YOu can just turn speech back on when you're done. Three finger double-tap, in case you need to know the gesture.

By Scott Davert on Friday, August 21, 2020 - 15:59

Member of the AppleVis Editorial Team

Hi Rob.
I'm a little confused here. If you want to shut up VoiceOver, what sort of way would you like it to be used other than to mute speech? Are you looking for some kind of speech on request feature like in the later versions of JAWS? Sorry, I think I'm not understanding your question.

By Rob on Friday, August 21, 2020 - 15:59

In reply to by Scott Davert

Hello, thank you both for commenting. Thanks Scott for your helpful articles. If I do not mute Voice Over speech I can review text silently using the right panning button. However, if I need to reverse or go up one line etc voice Over begins speaking again. this happens whether I use the reverse panning button or rocker bars etc. Again I am using a Focus 40 Blue Classic Braille display. I must admit since my post I haven't dedicated enough time to conduct my own troubleshooting. I discovered that my display no longer holds a charge and I have not pulled out the AC adapter as of yet. things have been busy here. lol. reviewing text silently forward and backwards can be accomplished on my PC with Jaws. thanks again for the replies.

By gailisaiah on Friday, May 21, 2021 - 15:59

Hello Scott: Thanks so much for this information. Just got a BrailleNote Touch Plus and hope to get it to pare with my phone. Thanks so much again for all these resources and all you do for Applevis!

By turner42 on Saturday, August 21, 2021 - 15:59

Scott has written an excellent article, but only mentioned 2 specific lines of braille displays that are above a lot of people's price range. Orbit Research makes the 20 Plus and the 40 that work extremely well with iOS devices. Orbit Reader 40:https://www.orbitresearch.com/product/orbit-reader-40/
Orbit Reader 20 Plus: https://www.orbitresearch.com/product/orbit-reader-20-plus/
They also make the original Orbit Reader 20, which has no onboard translation: https://www.orbitresearch.com/product/orbit-reader-20/

By Scott Davert on Monday, March 21, 2022 - 15:59

Member of the AppleVis Editorial Team

I have updated this guide to reflect changes in iOS 15 related to the functionality of Siri.

By Barbara on Monday, March 21, 2022 - 15:59

My mom, who is sighted, uses a BlueTooth keyboard because she has difficulty using a touch screen due to issues with a palsy. She is also experiencing problems using the Bluetooth keyboard to type passwords on some web sites. I am wondering if some sites are using code to prevent users from using hardware keyboards to enter passwords? I use a site that doesn't allow copying or pasting of passwords. Each time I visit the site, I have to type the password in manually.

By Blind angel 444 on Monday, March 21, 2022 - 15:59

I just got mine and I don’t know how to use it with my iPad. I have a few questions the literature didn’t cover. Thank you Scott, for making this guide for the Braille users.

By Scott Davert on Monday, March 21, 2022 - 15:59

Member of the AppleVis Editorial Team

Hi.
This guide does not cover any specific braille displays, rather, it covers how to use them on iOS. You may also be able to press u from the main menu to get to the internal User Guide. I've never used one, and since there are 2 differnet models available, I'm afraid I can't be of much help.

By Blind angel 444 on Monday, March 21, 2022 - 15:59

What are the two models available? I have the 20 cell one.
Also how can you pair one with a smart tv? If possible I want to be able to read the English subtitles and closed captioning in tv shows and movies.?

By Brian Giles on Monday, March 21, 2022 - 15:59

This thread got me curious cuz I'd never heard of these NLS ereader displays. Apparently my library is one of the ones piloting them so i have one on the way.

There are video tutorial series on YouTube for each of the models (and yes, they include pairing them with an iOS device). It sounds to me like one of them is just a HumanWare Brailliant BI20X/ APH Chamaeleon with software created for NLS on it. The specs look exactly the same. The other one is made by Zoomax, whom I've never heard of. I wonder if that's a display brought over from Europe, like the Baum displays used to be. From what I read it sounds like different libraries were/are pilotting one or the other. I'm hoping I get the HumanWare one cuz it sounds less complicated on paper, although as with everything, people in the Google groups thread I found differ on that.

Looking forward to playing with it though! I've wanted a smaller display to use with my iPhone for a while and the new HumanWare ones sounded on paper like they would be perfect. I hope it's better to type on than my 4th gen Focus 40. I don't like the space bar on it... half the time it doesn't register.

By Scott Davert on Monday, March 21, 2022 - 15:59

Member of the AppleVis Editorial Team

Hi Blind Angel444
Pairing with an Apple TV is on topic for the site, but not this guide. Please consider posting your questions in the appropriate forum.
NLS has an audio guide for the Humanware model, hopefully also a brf version since it's a braille display, but I'm not sure about the Zoomax display. I've not seen much posted about it anywhere. For the most part, the Humanware model follows their 20 cell display called the Brailliant BI 20X. It may also be worth contacting your cooperating library where you obtained the device from, they are supposed to be able to also provide support. Good luck!

By Lielle ben simon on Monday, March 21, 2022 - 15:59

Hi, I like your artical.
I want to point ing out for the locking screen from Braille Display.
I had assigned a command for BI 40 X.
It works beutyfully with my iPhone.
I am running iOS14.4 and an iPhone 13 Pro.

By Dawn 👩🏻‍🦯 on Sunday, August 21, 2022 - 15:59

Hey, all! I have another free solution for typing out emails. Because while the bug with focus jumping to the top of the message when entering new lines is fixed, (Yay! Thank goodness!) the cursor still wants to jump to random places within the message. So, I still have to use this for lengthy emails, or emails that I want to for lack of better words, get right. While I use Voice Dream Writer and absolutely love it, I have also tested and found success with Drafts 5. While I typically use this app as a way to quickly jot down notes such as case numbers, I have used this app to help me type out contents of email messages. I find that it works just as good as Voice Dream Writer! While it makes composing emails and sometimes other things more of a pain in the rear than it should be, due to it taking longer with having to type out the message in another document, then selecting it all, and copying and pasting it into an email, it's a great alternative. Especially if you can't afford or don't want to spend the $9 for Voice Dream Writer, but still need and or want a more reliable option besides the Notes app.

By Deborah Armstrong on Thursday, September 21, 2023 - 15:59

Maybe this can help some beginners. When I get a new Braille display-- and this has happened several times -- I go to AppleVis and search for Braille, first under the Podcasts filter, and then under the guides filter.
I collect all this info in files on my PC or Victor Reader stream. Use a device with which you are comfortable, because reading or listening to a tutorial on a new device, while trying to master another new device is a pain.
Now that I have all the guides and podcasts in one place, I start listening and reading, and trying out the commands using my display. With Braille, for me it's not enough to memorize the dot patterns but to have a kinesthetic sense of how to perform the command. So I've gone through this process with a Brailliant and a VarioUltra, both belonging to my employer, a Freedom Scientific Focus and an NLS eReader which I personally own. I do a little on this project each day, because my brain can retain only so many new commands. The idea is to get comfortable with three each day or one new app using Braille each day.
I may have overdosed on Scott's helpfullness but he's truly managed for me to become an expert in using all four displays with iOS!!!

By Scott Davert on Thursday, September 21, 2023 - 15:59

Member of the AppleVis Editorial Team

This guide has been updated to address changes in the braille display market as well as to add sections for some workarounds for bugs and also updated for iOS 16.6. Thank you all for your feedback! As yo u can see, I've incorperated some of the feedback in my guide to reflect some of the contributions.

By Holger Fiallo on Thursday, September 21, 2023 - 15:59

Sad that a Braille display is more than my monthly mortgage payment.